Description
- Allows single line telephones or a telephone system to share a phone line with two Viking entry phones
- Distinctive ringing, programmable entry phone Caller ID or beep tones allow you to distinguish front and back door entry calls from CO call
- Stackable - connect up to four C-500’s to control up to eight entry points
- Built in five number call forwarding dialer (if inside phone doesn’t answer), detects busy or ring no answer and goes on to the next number
- Provide entry phone activated chimes and whole house paging when used with an SLP-1 or SLP-4
- Analog Station Mode allows entry phones to connect to analog PABX station
- Two N.O./N.C. (SPDT) 5A door strike relays with 1 or 2 digit activation commands
- Monitor any entry phone
- Up to 6 different keylesentry codes, 2 "one time use" keyless entry codes, and 1 keyless toggle code per entrance
- Auto answer for remote programming, relay control and monitoring
- Two trigger inputs for Request to Exit (REX), immediate call forwarding or lighted doorbell switches to activate entry phone calls
- Produces "Call Waiting" tones if the entry phone is activated when the house phones are on a call
- Compatible with the following Viking entry phones:
- - E-10A, E-20B, E-30, E-35, E-40, E-50, E-60, E-65, E-70, and E-75 Pones
- - K-1500-7 Stainless Steel Panel Phone
- - K-1700-3 and K-1705-3 Phone with Keypad
- - K-1900-8 Stainless Steel Panel Phone with Keypad
- - Or use with any analog touch tone phone