VIKING ELECTRONICS | E-30-IP
VoIP Stainless Steel Handsfree Speaker Phone, Vandal-Resistant 14 Gauge Louvered Stainless Steel, Flush Mount with Included Rough-In Box or Surface Mount with an Optional VE-5x5 (5 in. x 5 in. 2.25 in.)

• Self diagnostic reports via email (testing com, mic, speaker & switch)
• Automatic polling and programming software included
• 2 Amp relay contacts for door/gate or SL-2 strobe light control
• Blue "Call Connected" LED indicator (E-10/E-30-IP only)
• SIP comtible (see pg 2 for list of compatible IP-PBX phone systems)
• PoE powered (class 1, <4 watts)
• Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
• VoIP eliminates the need for "Push to Talk" mode
• Network downloadable firmre
• Handsfree operation
• Marine grade 316 stainless steel prevents corrosion on the stainless steel models
• Programmable to dial up to 5 numbers on busy or ring no answer
• Cycles through backup phone numbers on busy or no-answer
• Optional Enhanced Weatherotection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
• Hangs up on busy signal, time-out or touch tone command
• Remotely programmable
• Extended temperature range (-30F to 130F)
• 3 different chassis or board onlavailable
• Volume adjustments for microphone and speaker
• E-10-IP and E-30-IP are flush mountable using the included rough-in box or can be surface mounted using an optional VE-5x5 Surface Mount Box (DOD# 424)
• Optional PB-100 Polling System available (DD# 232)
• Optional SL-2 or BLK-4-EWP strobe light kit available (DOD# 242/653)